Problmy s OFP Cool Editorem

Shdocvw.dll is not correctly registered

  Pokud spustte Cool Editor a zobraz se irou nhodou chyba podobn tomuto "Dependency Shdocvw.dll
  is not correctly register", mate tu adres problm se souborem Data1.zip, ve kterm je zmiovan knihovna. Zkuste nkolik
  postup jak to opravit.

  1).Rozbalte knihovnu do adrese kde je OFP Cool Editor.exe
     Zkuste program spustit. Pokud stle nefunguje, pokraujte u kroku 2

  2).Mel by se vam do adresare rozbalit i program regsvr32.exe. Spuste ho s
     parametry regsvr32.exe shdocvw.dll. Pokud nahls chybu nebo nebude program stle
     fungovat, pokraujte krokem 3.

  3).Premstte shdocvw.dll do systmov sloky a zkuste program znovu spustit.
     Pokud je knihovna jiz v systemu, nenechavejte ji prepsat a pokracujte krokem 4.
     Nefunguje? Sakra, tak krok 4.
   
  4).Premistte do systmu i regsvr32.exe a spuste ho se stejnmi parametry jako
     u kroku 2. Ted u to fungovat mus!

  Tento problm se objevil jen na Win 95.

Seznam jazyk je przdn
  
  Nevm jak je to mon, ale pesn tohle se stane kdy ta hloup instalace nezaregistruje sprvn knihovnu
  scrrun.dll, kter je snad jedin co m potebu bt sprvn zaregistrovan ve windows. Postup na odtrann:

  1) Kouknte se, zda je v systmov sloce zmiovan knihovna.

  2)Pokud tam nen, nahrajte ji tam z piloenho zip souboru.

  3)Nahrajte tam pechodn i progrmek regsvr32.exe

  4)Spuste regsvr32.exe s parametrem: regsvr32.exe scrrun.dll. Knihovna bude zaregistrovna do systmu a mus se
    objevit hlka se slovem success, nebo prost e se to povedlo.

  5)Mete smazat regsvr32.exe ze sytmu a tam nemte nepodek. Seznam pro vbr jazyku u prost neme bt przdn.

Nezobrazuj se dn psmena

  V souboru OFCEinfo.cfg je asi patn uloen cesta k souboru s jazykem. Postup na odstrann:

  1)Zkuste smazat ve zmnn konfiguran soubor. Spuste program a ten by se ml zeptat na jazyk kter
    chcete nast. Vyberte si a kliknte na lev tlatko.

  2)Pokud vs program nenech vybrat si jazyk, muste to zkusit run. Program m tyi menu. I kdy zde nen na dnm
    popisek, zkuste se dostat do toho tvrtho poslednho a kliknte na posledn pkaz. Tm se zobraz dialog pro
    vybrn jazyku. Vyberte si a kliknte na lev tlatko. Jazyk bude naten a po ukonen programu bude i cesta k nmu
    uloena sprvn.


Poznmka: Prce s regsvr32.exe
   Tato utilita registruje do systmu knihovny a ocx komponenty. Sta zadat nzev komponenty a bude zaregistrovna. Mus bt samozejm
   ve stejnm adresi jako program a nejlpe v systmovm. Zadnm parametru /u knihovnu odregistrujete a mete ji smazat. Ale s tm radi velmi opatrn a jen
   na vlastn nebezpe


Known problems with OFP Cool Editor 2.3

Shdocvw.dll is not correctly registered

  1).If you will launch OFP Cool Editor and message like this will be display: "Dependency Shdocvw.dll is not
  correctly register", unpack the problem data1.zip from problem folder to your OFP Cool Editor folder.
  Try to run Cool Editor now. If ot don't work, continue by step 2.

  2).At OFP Cool Editor folder you have now shdocvw.dll and regsvr32.exe. Run regsvr32.exe with
  this parameters: regsvr32.exe shdocvw.dll. If error will be displayed or program still not work,
  continue by step 3.

  3).Move shdocvw.dll to your system folder. Do not rewrite existing file. If this dlll already
  exists in your system, continue by step 4. Try run Cool Editor. Don't it work? Continue by step
  4.

  4).Move or copy regsvr32.exe to system folder to. Run it with the same parameters like at step 2.
  It must work now!

  This problem was only at Win 95

Language list is empty:

  1)Check if the English.lng and Czech.lng are in the languages directory. If they are, continue by step 2.

  2)The language list is empty because the stupid installation didn't register the scrrun.dll file, what is
    necessary for loading languages from language directory. Look if the instllation do copy it to the system folder.
    
    If the file is not in the system directory, copy it to it. It must be unziped with this file. 

    Copy the regsvr32.exe program to system folder to. Run regsvr32.exe like this:

    regsvr32.exe scrrun.dll    -  it will register the dll file to your system and message like this must be
                                  displayed: Register scrrun.dll success.

    Launch the program and language list can not be empty.

Language wasnIt loaded and all boxes are clear:

  1)Look if there is OFPCEinfo.cfg in the application folder. If it is, delete it and try launch program again.
    It must display language slection dialog. Choose what language you want and click the left button.

    If the dialog will not be displayed, the program have four menus. I know, its hard to take orientation in them
    if there aren't labels on them, but try to go to the fourth menu and click the last command. It will display
    language selection dialog to. Choose language here and click left button. Language will be loaded and when you will
    terminate program, the configuration will be saved correct.

If you have some else problem, mail me to

silenymurdock@volny.cz                  or               R.Henys@seznam.cz

Mad Murdock